中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

200G QSFP56 SR4 100m 850nm PM4 Transceiver

Features

QSFP56 Serial Optical Interface

4x50G PAM4 retimed 200GAUI-4 C2M electrical interface

MPO-12 connector
4 channel VCSEL array and 4 channels PIN photodetector array >Maximum link length of 70m on OM3 or 100m on OM4

QSFP MSA Compliant

Hot Pluggable QSFP56 form factor
Compliant with SFF8636 Rev 2.10a

Support Protocol

Compliant with IEEE 802.3cd

Low Power Consumption

Less than 5W in temperature range of 0 to 70℃

Applications

200GBASE-SR4200G Ethernet
Data center

现在查询下载

类别

热门产品

产品详细信息

200G QSFP56 SR4 100m 850nm MPO PM4 Optical Transceiver

Functional Block Diagram

200G QSFP56 SR4

General Description

200G QSFP56 SR4 Optical Transceiver modules are designed for use in 200Gigabit Ethernet links over OM3/OM4 multimode fiber. They are compliant with the QSFP MSA and with IEEE 802.3cd 200GBASE-SR4 specification. Digital diagnostics functions are available via the I2C interface as specified by SFF-8636.The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Storage Temperature	Ts	-40	85	℃
Relative Humidity (non-condensation)	RH		85	%
Supply Voltage	Vcc	-0.5	3.6	V
Receiver Damage Threshold, per Lane	PR dmg	5		dBm

Recommended Operating Conditions

Parameter	Symbol	Min	Max	Unit
Operating Case Temperature	Top	0	70	℃
Power Supply Voltage	Vcc	3.135	3.465	V
Total Power Consumption	Pc		5	W
Bit Rate	BR		212.5	Gbps
Fiber Length on OM3 MMF			70	m
Fiber Length on OM4 MMF			100	m

Transmitter Optical Interface

Parameter	Symbol	Min	Typical	Max	Unit
Data rate per lane	DR		26.5625		Gbd
Modulation format		PAM4
Center Wavelength	λ	840	850	868	nm
RMS spectral width	σ			0.65	nm
Average Launch power, each lane	Pavg	-6.5		4	dBm
Optical Power OMA, each Lane	PoMA	-4.5		3	dBm
Launch power in OMA outer minus TDECQ		-5.9			dBm
Transmitter and dispersion eye closure (TDECQ), each lane	TDECQ			4.5	dB
Extinction ratio	ER	3			dB
Optical Return Loss Tolerance	ORLT			12	dB
Optical Power for TX DISABLE				-30	dBm
Encircled fluxb¹		≥86%at 19 um ≤30%at 4.5 um

Notes:

1.Measured into type A1a.2 or type A1a.3, or A1a.4,50 um fiber, in accordance with IEC 61280-1-4

Receiver Optical Interface

Parameter		Symbol	Min	Typical	Max	Unit
Data rate per lane		BR		26.5625		Gbd
Modulation format			PAM4
Damage threshold			5			dBm
Average receive power, each lane			-8.4		4	dBm
Receiver reflectance		Rr			-12	dB
Receiver sensitivity, each lane¹			RS=max (-6.5, SECQ-7.9)			dBm
Stressed receiver sensitivity, each ane					-3.4	dBm
Rx LOS	Assert		-30			dBm
	De-assert				-9	dBm
	Hysteresis		0.5			dB

Notes:

1.Receiver sensitivity is informative and is defined for a transmitter with a value of SECQ. Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FEC.

High speed Electrical Specifications

Parameters	Min	Typical	Max	Unit
Supply voltage	3.135		3.465	V
Supply Current			1.59	A
Input differential impedance	90	100	110	Ω
Differential pk-pk input Voltage Tolerance	900			mVpp
Differential data output swing			900	mVpp
Bit Error Rate Pre-FEC			2.4E-4
Input Logic Level High	2		Vcc	V
Input Logic Level Low	0		0.8	V
Output Logic Level High	Vcc-0.5		Vcc	V
Output Logic Level Low	0		0.4	V

PIN Definitions

QSFP56 pin-out as being defined by QSFP MSA，PIN Descriptions are as follows:

200G QSFP56 SR4

Package dimensions

shows the package dimensions of the module. Package dimensions are specified in QSFP MSA.

200G QSFP56 SR4

Ordering Information

Part Number

Temperature Range

Distance

Fiber Type

E/O

O/E

RQ56-200G-SR4

0 to 70℃

100m

MMF

VCSEL

850nm

相关产品

200G QSFP56 FR4 2KM LC PAM4 Optical Transceiver

Features 4 duplex channels transmitters and receivers Integrated CWDM LD and PD array LC/UPC connecting interface compliant Single +3.3V power supply DDM function implemented Hot-pluggable QSFP56 form factor Transmission length up to 2km Low power dissipation:

8*10/100/1000M RJ45电口+24 *千兆SFP 光口 +4* 10G 上联SFP+光口网络交换机换机

支持8个千兆以太网口+24个千兆SFP光口+4个万兆SFP+光口上联, 2层网络交换机所有端口支持无阻塞线速转发，传输更流畅。支持 IEEE 802.3x 全双工流控和 Backpressure 半双工流控。支持 IEEE 802.1Q VLAN，用户可以按需求灵活划分 VLAN，支持 Voice VLAN,支持 QinQ 配置。支持 Web 网管、CLI 命令行（Console，Telnet）、SNMP（V1/V2/V3）、Telnet 等多样化的管理和维护方式

10电POE千兆工业级交换机 FW308GPS-2G

10*10/100/1000M自适应RJ45端口 FW308GPS -2G 是一款准工业全千兆管理型POE交换机,提供8个千兆POE端口，2个千兆上行电口，EMC工业4级的防护性能；波纹式高强度铝型材外壳、IP40等级、低功耗设计、抗震的导轨安装，-40℃-75℃的工作温度，可工作于恶劣环境。

100G QSFP28 CWDM4 2km LC Optical Transceiver

100G QSFP28 CWDM4 optical transceiver module, support 100Gb/s and up to 2 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on.

千兆1光1电收发器

功能特性 1个10/100/1000 Mbps 自适应RJ45端口 1个上联口为1000Mbps SFP或1*9光纤接口支持端口自动翻转（Auto MDI/MDIX）流控方式：全双工采用IEEE 802.3x标准，半双工采用Back pressure标准符合IEEE 802.3 10Base-T和IEEE 802.3u 100/1000Base-TX标准采用存储转发的交换机制 64～9000帧长范围内均可达到线速

4选1光开关切换设备

插卡4选1光切换，自动光功率检测切换 1U, 2U, 4U 机箱设计，密度集成度高具有插入损耗小，切换速度快等特点可通过串口指令或以太网口指令方式进行光路切换设置

3G Video CWDM SFP Optical Transceiver support 1080P 60HZ Video

3G Video CWDM SFP optical transceiver module, support 1080p 60HZ video and up to 80 km transmission. It works in optical video transmission.

工业级轨式 1路 RS-485 串口服务器

功能特性采用ARM Cortex -M4，主频192MHz处理器；支持1路百兆以太网；以太网支持10/100Base-T(X)自适应以太网接口；支持自动协商（Auto-Nego Full&half duplex）,支持自动交叉线检测（MDI/MDIX）；提供1路RS485串口，支持300bps-921600bps线速无阻塞通信，支持波特率自动扫描匹配，支持客户自定义波特率；支持支持Modbus TCP，TCP Server、TCP Client、UDP Server、UDP Client，等多种工作模式；完成Modbus-RTU到Modbus-TCP透明转换，实现通过网络方式读取串口设备数据；支持串口状态和串口参数监视，通信状态一目了然；支持过网关，跨路由通信；支持虚拟串口驱动访问模式和网络中断自动恢复连接功能；灵活的串口数据分帧设置，满足用户各种分包需求；支持标准TCP/IP SOCKET应用程序访问,TCP支持多连接，满足4个以内用户同时监控或管理串口设备； UDP方式下支持单机或多机通讯，满足多个用户同时监控或管理串口设备；支持Windows配置工具、串口和WEB等多种配置形式、支持SNMP网管；支持本地和远程的系统固件升级；支持B/S构架的SNMP网管软件，来统一网管多台串口服务器。 RS485接口有三级防雷保护，防雷达到GB/T17626.5(IEC61000-4-5) 短路电流波10/700μs，开路峰值输出电压6KV，内阻40欧标准; 支持宽范围5-70V交流与直流电源输入，电源接口具有6kV防雷能力; 电源支持过载保护、防反接保护;符合工业四级电磁兼容性要求; 超强防雷功能：防雷击，可抗感应高压，防浪涌等; 无风扇高效散热，降低修复时间; 导轨或壁挂式安装; 宽温型：工作温度-40℃~ +85℃;

联系我们