超大传输容量 优异的100G传输性能 灵活全面的业务接入能力 电信级的可靠保护 优异架构，方便易维

支持2个100G业务光信号复用成1个200G速率的DWDM标准波长光信号

支持4个10G&25G业务光信号复用成1个40&100G速率的WDM标准波长光信号 支持1个40&100G业务光信号解复用成4个10G&25G速率的WDM标准波长光信号

支持1个100G业务透明传输，可将1个100G业务光信号转换成1个DWDM标准波长光信号

支持2个100G业务透明传输，可将2个100G业务光信号转换成2个WDM标准波长光信号

支持2个40G业务透明传输，可将2个40G业务光信号转换成2个WDM标准波长光信号

支持4个16G~32G速率范围内任意类型业务透明传输，可将4个业务光信号转换成4个WDM标准波长光信号

支持4个42M~11.3G速率范围内任意类型业务透明传输，可将4个业务光信号转换成4个WDM标准波长光信号 客户侧接口：4个，基于SFP+可插拔，兼容SFP 线路侧接口：4个，基于SFP+可插拔，兼容SFP

EDFA BA LA PA 支持C波段48波/96波DWDM信号统一放大。 自动增益控制（AGC) 增益平坦、噪声指数小 支持内置EVOA，光功率自动调节。

光线路主备纤1+1保护 光波长主备纤1+1保护

IL<5.5dB , 50GHZ DWDM AAWG Technology Monitor Port for Troubleshooting, 1310nm Port for Legacy Traffic Multiplexing of 96 Channels, C13/H13~C60/H60 Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks

IL

IL

IL

IL

IL

IL<2.4dB , 100GHZ DWDM OADM MUX DEMUX Multiplexing of 8 Channels Drop and Add, over a Dark Fiber Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks

IL

IL

IL

产品特点 低插损，不影响数据流量包。 无需电源，无需IP址址，无需MAC地址，100%无源产品，性能安全可靠 安装和操作简单，非专业人士即可独立完成。 16个OTAP端口，支持8路主链路串接，数据流量复制；可替代8个交换机镜象端口。 成本低，集成度高

产品特点 低插损，不影响数据流量包。 无需电源，无需IP址址，无需MAC地址，100%无源产品，性能安全可靠 安装和操作简单，非专业人士即可独立完成。 16个OTAP端口，支持8路主链路串接，数据流量复制；可替代8个交换机镜象端口。 成本低，集成度高

产品特点 低插损，不影响数据流量包。 无需电源，无需IP址址，无需MAC地址，100%无源产品，性能安全可靠 安装和操作简单，非专业人士即可独立完成。 16个OTAP端口，支持8路主链路串接，数据流量复制；可替代8个交换机镜象端口。 成本低，集成度高

产品特点 属于无源设备，可靠性更高。 模块化设计，1U 机箱可插入2个模块 安装和操作简单，非专业人士即可独立完成。 成本低，集成度高

支持8条40G/100G/200G MPO流量分光复制 低插损，不影响数据流量包。 无需电源，无需IP址址，无需MAC地址，100%无源产品，性能安全可靠 安装和操作简单，非专业人士即可独立完成。 16个OTAP端口 ，支持8路主链路串接，数据流量复制；可替代8个交换机镜象端口。 成本低，集成度高

低插损，不影响数据流量包。 无需电源，无需IP址址，无需MAC地址，100%无源产品，性能安全可靠 安装和操作简单，非专业人士即可独立完成。 8个OTAP端口，支持4路主链路串接，数据流量复制；可替代4个交换机镜象端口。 成本低，集成度高，最多可集成32个OTAP端口，支持16路主链路中接，数据流量复制

低插损，不影响数据流量包。 无需电源，无需IP址址，无需MAC地址，100%无源产品，性能安全可靠 安装和操作简单，非专业人士即可独立完成。 28个OTAP端口，支持14路主链路串接，数据流量复制；可替代14个交换机镜象端口。 成本低，集成度高

产品特点 低插损，不影响数据流量包。 无需电源，无需IP地址，无需MAC地址，100%无源产品，性能安全可靠 安装和操作简单，非专业人士即可独立完成。 16个OTAP端口，支持8路40G主链路串接，数据流量复制；可替代8个交换机镜象端口。 成本低，集成度高

标准PCIE插卡式设备 POS协议转换 支持采集、过滤、汇聚、分流、负载均衡、复制 完美替代DPDK、Hyperscan方案 基于L2-L7层过滤 正则表达式匹配加速 时间戳标签 高性能线速抓包 服务器CPU、内存占用率低

支持5个百兆/千兆电口，所有端口线速输入输出 支持以太网封装无关性，包括错包的所有数据包完整复制 支持串接1分3，旁路1分4流量复制输出 带拨码开关可切换串接和旁路模式，零配置简单易用 配安装面板可固定在19英寸机架上

Features OSFP Serial Optical Interface 8x100G PAM4 retimed 800GAUI-8 electrical interface Dual MPO-12 APC connector and MPO16 APC connector are provided 8 channel VCSEL arrays and 8 channels PIN photo detector arrays Maximum link length of 60m on OM3 or 100m on OM4 OSFP MSA Compliant Hot Pluggable OSFP form factor Compliant to OSFP Module Specification Rev 5.0 Compliant with CMIS 5.2 Support Protocol Compliant with IEEE 802.3db Compliant to IEEE 802.3ck Low Power Consumption Less than 14W in temperature range of 0 to 70℃ Applications 800GBASE-SR8 800G Ethernet Data center

Features Form Factor: Hot-pluggable OSFP800 form factor Data Rate: Aggregate data rate of 850 Gb/s and Breakout data rate of 106.25 Gb/s Optical Interface: Compliant to 2×400GBASE-DR4 and 8x100GBASE-DR Electrical Interface: Compliant to 2×400GAUI-4 and 8x100GAUI-1 Management Interface: I2C management interface Reach: Up to 500m over MPO/APC single mode fiber Power consumption: 16 W max Operating case temperature: 0 ~ 70 ℃ Power Supply: Single 3.3V power supply Compliance Form Factor: OSFP MSA Rev 5.0 Optical: IEEE802.3cd /IEEE802.3bs Electrical: IEEE802.3ck Firmware: CMIS 5.2 Environment: RoHS Stability: GR-468-CORE Applications 800Gb/s Ethernet Data Center

Features IEEE 802.3bs Specification compliant QSFP-DD MSA compliant 4x106.25 Gbps PAM4 optical interface 8x53.125 Gbps PAM4 electrical interface I2C interface with integrated DDM Up to 2km transmission distance on single mode fiber (SMF) with FEC up ply voltage: 3.3 V Maximum power consumption: 12 W MTP/MPO-12 connector Operating case temperature: 0 to 70 °C RoHS compliant Applications 400G Ethernet Datacenter enterprise networking

Applications 400G BASE-FR4 Ethernet Data Center Interconnect InfiniBand Interconnect Enterprise Networking Features Compliant to QSFP-DD MSA 4 CWDM   lanes MUX/DEMUX design 100G Lambda MSA 400G-FR4 Specification compliant Maximum power consumption 10W

Features QSFP-DD Serial Optical Interface 8x50G PAM4 retimed 400GAUI-8 electrical interface MPO-12 connector with 8° angled end-face Up to 500m on SMF with FEC QSFP-DD MSA Compliant Hot Pluggable QSFP-DD form factor Compliant with CMIS5.2 Support Protocol IEE802.3.bs 400GBASE-DR4 Specification compliant Low Power Consumption Less than 10.5W in temperature range of 0 to 70℃ Applications 400Gb/s Ethernet Data Center InfiniBand interconnects

Features CAUI -10 Electrical Interface:10 Lanes @10Gbit/s for CFP port CAUI -4 Electrical Interface:4 Lanes @25.78Gbit/s for QSFP28 port Hot Pluggable Low latency FEC MDIO, I2C Support Compliant to CFP MSA Case operating temperature: 0 to 70 °C The RQ-CFP-QSFP28-F Adaptor Module converts a 100 Gigabit CFP port into a 100 Gigabit QSFP28 port. With the Adaptor Module, customers have the flexibility to use the 100 Gigabit CFP interface port of a switch with CFP modules or QSFP28 modules. For 100G Ethernet, reference clock can switch 161.133mhz or 644.531mhz; For OUT 4, reference clock can switch 174.703mhz or 698.812mhz; Users can control whether FEC function is enabled or not through register configuration.

Features Supports 100GBASE-LR1- 10 BIDI Lane signaling rate 106.25Gb/s with PAM4 Up to 10km transmission on SMF EML Laser and PIN receiver 4x25.78Gb/s with NRZ electrical interface (CAUI-4) High speed I/O electrical interface I2C interface with integrated Digital Diagnostic monitoring QSFP28 MSA package with simplex LC connector Single +3.3V power supply Support HW TX_DIS and RX_LOS for telecom application Maximum power consumption 4 W Operating case temperature: 0 to +70 °C Compliant to 802.3cu, SFF-8636&SFF-8679 standard Complies with EU Directive 2015/863/EU Application 100GBASE-LR1- 10 BIDI

Features Form Factor: Hot-pluggable OSFP form factor Data Rate: Aggregate data rate of 425 Gb/s and Breakout data rate of 106.25 Gb/s Optical Interface: Compliant to 400GBASE-DR4 and 4x100GBASE-DR Transmitter: EML 1310nm transmitter Electrical Interface: Compliant to 400GAUI-4 and 4x100GAUI-1 Receiver: PIN and TIA array on the receiver side Management Interface: I2C management interface Reach: Up to 500m over MPO-12/APC single mode fiber Power consumption: 9 W max Operating case temperature: 0 ~ 70 ℃ Power Supply: Single 3.3V power supply Compliance Form Factor: OSFP MSA Optical: IEEE802.3bs Electrical: IEEE802.3ck Firmware: CMIS Environment: RoHS Stability: GR-468-CORE Applications 400Gb/s Ethernet Data Center InfiniBand

Features Supports 100GBASE-ER1-40 BIDI Lane signaling rate 106.25Gb/s with PAM4 Up to 40km transmission on SMF EML laser and APD receiver 4x25.78Gb/s with NRZ electrical interface (CAUI-4) High speed I/O electrical interface I2C interface with integrated Digital Diagnostic monitoring QSFP28 MSA package with simplex LC connector Single +3.3V power supply Maximum power consumption 4.5 W Operating case temperature: 0 to +70 °C Compliant to 802.3cu, SFF-8636&SFF-8679 standard Complies with EU Directive 2015/863/EU Application 100GBASE-ER1-40 BIDI

Features OSFP Serial Optical Interface 4x100G PAM4 retimed 400GAUI-4 electrical interface Active Optical cable 4 channel VCSEL arrays and 4 channels PIN photo detector arrays Maximum link length of 60m on OM3 or 100m on OM4 OSFP MSA Compliant Hot Pluggable OSFP form factor Compliant to OSFP Module Specification Rev 5.0 Compliant with CMIS 5.2 Support Protocol Compliant with IEEE 802.3db Compliant to IEEE 802.3ck Low Power Consumption Less than 8W in temperature range of 0 to 70℃ Applications 400GBASE-SR4 400G Ethernet Data center

产品应用 光传输系统中的多路光纤监控 组成光纤及各种光器件的测试系统 多光源/探测器自动换接系统 光传感多点动态监控系统 光测试系统中用于光纤、器件、野外光缆测试 实验室光器件测试研究 组建光纤自愈网络 功能特点 产品具备低损耗、高可靠性 内部器件均选用进口元件，可靠性更好 模块化设计，可灵活嵌入各领域系统 控制方式简单方便易控制 内部电路设计故障自检告知功能

Unmatched Low Cost, 1x4 Mechanical Optical Switch Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path

Unmatched Low Cost, 4x4 Mechanical Optical Switch Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path

产品应用 光传输系统中的多路光纤监控 组成光纤及各种光器件的测试系统 多光源/探测器自动换接系统 光传感多点动态监控系统 光测试系统中用于光纤、器件、野外光缆测试 实验室光器件测试研究 组建光纤自愈网络 功能特点 产品具备低损耗、高可靠性 内部器件均选用进口元件，可靠性更好 模块化设计，可灵活嵌入各领域系统 控制方式简单方便易控制 内部电路设计故障自检告知功能

Up to 1x64 Mechanical Optical Switch Unmatched Low Cost Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path

Unmatched Low Cost, 4x4 Mechanical Optical Switch Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path

Unmatched Low Cost,1x2 Mechanical Optical Switch Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path

Unmatched Low Cost, D1x2 Mechanical Optical Switch Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path

Unmatched Low Cost, Full 2x2 Mechanical Optical Switch Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path

Unmatched Low Cost, 2x2 Bypass Mechanical Optical Switch Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path

产品特点 具有插入损耗小，切换速度快等特点。 采用LCD显示屏，非常直观的显示光路状态，方便用户的操作。 可通过面板按键和串口指令两种方式进行光路切换设置。并可通过串口指令锁定按键操作。

插卡2选1光切换，1U, 2U, 4U 机箱设计，密度集成度高 具有插入损耗小，切换速度快等特点 可通过串口指令或以太网口指令方式进行光路切换设置

插卡4选1光切换，自动光功率检测切换 1U, 2U, 4U 机箱设计，密度集成度高 具有插入损耗小，切换速度快等特点 可通过串口指令或以太网口指令方式进行光路切换设置

支持应用于各种光通信系统； 支持双纤、单纤传输网络线路保护； 支持自动或手动切换多种工作模式； 支持主备路由实时监测； 支持掉电、上电保持功能； OLP功能板与网元管理板相互独立，互不影响； 支持SNMP、Web等多种图形化界面网管； 1U插卡式设计，容量灵活配置支持 交流220V、直流-48V供电可选，1+1电源输入保护；

支持应用于各种光通信系统； 支持双纤、单纤传输网络线路保护； 支持自动或手动切换多种工作模式； 支持主备路由实时监测； 支持掉电、上电保持功能； OLP功能板与网元管理板相互独立，互不影响； 支持SNMP、Web等多种图形化界面网管； 2U插卡式设计，容量灵活配置支持 交流220V、直流-48V供电可选，1+1电源输入保护；

具有插入损耗小，切换速度快等特点。 光开关内部电路自检测，故障报警告知。 串口RS-232，以太网RJ45通信接口。 采用 LCD 显示屏,非常直观的显示光路状态,方便用户的操作。 可通过按键和串口、网口发送指令控制光路切换设置。并可通过串口指令锁定按键操作。

4X4全通矩阵光开关切换 具有插入损耗小，切换速度快等特点 采用LCD显示屏，非常直观的显示光路状态，方便用户的操作。 可通过面板按键和串口指令两种方式进行光路切换设置。并可通过串口指令锁定按键操作

自动切换，无需人为干预 被保护设备掉电时切换 减少网络节点故障造成的各种损失 增加传输网络的可靠性 支持手动切换和自动切换选择 业务透明，对业务类型没有限制 宽范围电源输入DC+5V TO +36V 电源接反保护 支持双电源接入 支持导轨式安装

Features Low insertion loss. High wavelength accuracy temperature: -40 to 85℃ Excellent thermal stability Extremely small size Applications CWDM Systems Telecom networks Metro Area Networks Broadband Networks PON Networks CATV Link

Features Low insertion loss. High wavelength accuracy Extended temperature range Excellent thermal stability Extremely small size Applications DWDM Systems Telecom networks Metro Area Networks Broadband Networks PON Networks CATV Link

Single channel 3 port CWDM filter, 1270nm~1610nm waves. Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

Single channel 3 port 50GHZ DWDM filter, DWDM C-Band. Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

Single channel 3 port 100GHZ DWDM filter, DWDM C-Band. Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

DWDM R B Filter, DWDM C-Band. Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

Single channel 3 port 200GHZ DWDM filter, DWDM C-Band. Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

Single channel 3 port FWDM filter, works in FTTH/FTTx optical network Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

Single channel 3 port 1625nm OTDR filter, works in OTDR system Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

Low insertion loss High Extinction Ratio High channel isolation High stability and reliability

High Performance in IL & RL Available in 8,12 and 24 fiber Precise dimension 100% in-house tested Customized furcation length to cater for different installation situations Single-fiber connector interface available in SC & LC in forms of Simplex or Duplex channel Support higher speed Ethernet and Fibre Channel applications (OM3, OM4 and SM fibers)

10路40G/100G MPO转40路双LC

High dense space Ceramic ferrules connector Low insertion loss High return loss Excellent mechanical endurance High credibility and stability

SM/G657A2 2 Cores, Black LSZH,φ5.0mm，Armored，breakout φ2.0mm