other
产品
首页 /

光器件

/

光开关

/

磁光开关

/1X2磁光开关

1X2磁光开关
1X2磁光开关 1X2磁光开关 1X2磁光开关 1X2磁光开关 1X2磁光开关

1X2磁光开关

Features

  • Solid-state high speed
  • High Stability, High Reliability
  • Epoxy-free on Optical Path
  • Fail-safe latching


Applications

  • Aerospace equipment
  • Configurable Add/Drop
  • System monitoring
  • Sensing system
现在查询 下载
  • 产品详细信息

M1x2 Magnet Fiber Optical Switch

 

The M1x2 optical switch is connected to the optical path by connecting or blocking the optical signal. the switch has non-mechanical configurations and activated via an electrical control signal. the switch also has build-in circulator and isolator functions. Products are widely used in aerospace and military equipment.


1x2 Magnet Fiber Optical Switch


Performance Specifications


Parameters

Unit

Specifications

Wavelength Range

nm

1520 ~ 1580

Test Wavelength

nm

1550

Insertion Loss1, 2

dB

≤ 1.2

TDL

dB

≤ 0.30

PDL

dB

≤ 0.20

Return Loss

dB

≥ 50

Crosstalk

dB

Bidirectional ≥ 20

Unidirectional ≥ 40

Repeatability

dB

≤ ±0.01

Switching Time

us

≤ 100

Pulse Duration

us

≥ 200

Durability

Cycles

≥10 Bllions

Switch Type

NA

Latching

Operating Current

mA

≤ 200

Maximum Optical Power

mW

≤ 500

Operating Temperature

℃

-5 ~ +70

Storage Temperature

℃

-40 ~ +85

Dimension

mm

(L)30.0×(W)7.5×(H)7.5 ±0.2

Note:  1 Test at room temperature and SOP.

2 Excluding connectors, 0.2dB for one pair connectors.


Mechanical Dimensions (Unit:mm)





Electrical Drive


Type

Status

Optical Route

Electric Drive

M1x2

Pin 1

Pin 2

Bidirectional

Ⅰ

P1—— P2

GND

V+

Ⅱ

P1—— P3

V+

GND

Unidirectional

Ⅰ

P1 → P2


P1 ← P3

GND

V+

Ⅱ

P1 → P3


P1 ← P2

V+

GND


Functional Diagram





Ordering Information

FSW-M1x2-□-□-□-□-□-□-□


—□

—□

—□

—□

—□

—□

—□

Switch Type

Fiber Type

Voltage

Wavelength

Tube Type

FiberLength

Connector

B：

Bidirectional

U：

Unidirectional

SM：

SM，9/125

X：

Others

2.5：

2.5V

X：

Others

1550：

1550nm

X：

Others

250：

250um

900：

900um

X：

Others

05：

0.5m±5cm

10：

1.0m±5cm

X：

Others

OO：None

FC：FC/PC

FA：FC/APC

SC：SC/PC

SA：SC/APC

LC：LC/PC

X：Others





想知道这个产品吗？

发送 信息
留言

如果您对我们的产品感兴趣并想了解更多详细信息，请在此处留言，我们将尽快答复您。

相关产品
1X4磁光开关 1X4磁光开关
Features Solid-state high speed High Stability, High Reliability Epoxy-free on Optical Path Fail-safe latching Applications Aerospace equipment Configurable Add/Drop System monitoring Sensing system
阅读更多
1X1磁光开关 1X1磁光开关
Features Solid-state high speed High Stability, High Reliability Epoxy-free on Optical Path Fail-safe latching Applications Aerospace equipment Configurable Add/Drop System monitoring Sensing system
阅读更多
2X2磁光开关 2X2磁光开关
Features Solid-state high speed High Stability, High Reliability Epoxy-free on Optical Path Fail-safe latching Applications Aerospace equipment Configurable Add/Drop System monitoring Sensing system
阅读更多
2X2B磁光开关 2X2B磁光开关
Features Solid-state high speed High Stability, High Reliability Epoxy-free on Optical Path Fail-safe latching Applications Aerospace equipment Configurable Add/Drop System monitoring Sensing system
阅读更多
1X8磁光开关 1X8磁光开关
Features Solid-state high speed High Stability, High Reliability Epoxy-free on Optical Path Fail-safe latching Applications Aerospace equipment Configurable Add/Drop System monitoring Sensing system
阅读更多
Dual Fiber 18CH 1270nm-1610nm CWDM MUX DEMUX 18路 双纤双向 CWDM 带监控口 波分复用设备
CWDM MUX DEMUX, Multiplexing up to 18 Channels on Fiber Pair 1% Monitor Port for Signal Analyzing or Troubleshooting Passive, Protocol Transparent for Ethernet, FC, OTN, SONET/SDH, etc. Fully Compatible with All ITU-T 1G/10G/25G CWDM Optics Applied to Metro, Regional CWDM Networks
阅读更多
10G SFF DWDM ZR 10G DWDM SFF 40km Transceiver -40℃ To 85℃
Features 1550nm or DWDM EML Laser with TEC,Available in all C‐Band Wavelengths on the 50GHz PIN- TIAReceiver LC duplex connector or customizable pigtail fiber Single Channel+ 3.3V Power Supply The CDR off-line mode supports 155-9.95 GBIT/s bit rate, and the CDR mode supports 9.95-10.3125 GBIT/s bit rate Internal Transmitting/Receiving CDR -40℃ to 85℃ Working Industria Temperature Suitable for40km SMF connection Comply with SFF-8472 Rev 10.2 Whole Metal Shell and Excellent electromagnetic interference performance Completely comply with RoHS Standard
阅读更多
LCC 系列并行光收模块 LCC 系列并行光收模块
LCC 并行光收发模块主要应用于光背板、服务器与存储器阵列的互连、雷达处理机等甚短距离的高速数据 通信连接和并行光互连领域，具有尺寸小，电磁辐射小、抗干扰能力强等特点。模块采用LCC 封装形式， 尾纤光纤接口为标准MT/MPO 接口，工作温度(环境温度)范围为-55℃～85℃。模块支持单通道传输速率1.25Gbps～10.3125Gbps
阅读更多
联系我们
订阅
订阅我们的时事信息，并及时了解最新新闻和交易！
  • f
  • tw
  • you
  • in
  • ins
版权所有 © 2013-2025 广州市瑞东电子科技有限公司. 所有权利保留. | 隐私政策 | 网站地图 | XML |
支持 IPv6 网络
粤ICP备2023059768号
提供者
留言
留言
如果您对我们的产品感兴趣并想了解更多详细信息，请在此处留言，我们将尽快答复您。

首页

产品

关于

联系