中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

XFP 10G DWDM 40km Transceiver

Features:

Support multi protocol from 9.95Gb/s to 11.3Gb/s
Hot pluggable 30 pin connector
Compliant with XFP MSA
Transmission distance of 40km over single mode fiber
DWDM EML laser transmitter
100GHz ITU Grid, C Band
Duplex LC connector
2-wire interface for management and diagnostic monitor
XFI electrical interface with AC coupling
Power supply voltages: +3.3V, +5V
Temperature range 0°C to 70°C
Power dissipation: <3.5W
RoHS Compliant Part

Applications:

10GBASE-ER/EW Ethernet
SONET OC-192 /SDH
40km 10G FC
DWDM Networks

Transceiver Types:

现在查询下载

类别

热门产品

产品详细信息

XFP 10G DWDM C17-C61 40km Transceiver

Hot Pluggable, Duplex LC, 100GHz, DWDM EML, Single mode
RXPD-10GD40-CXX

10G XFP 40km

Description:

FIBERWDM’s RXPD-10GD40-CXX Small Form Factor 10Gb/s (XFP) transceivers are compliant with the current XFP Multi-Source Agreement (MSA) Specification. The high performance cooled DWDM EML transmitter and high sensitivity PIN receiver provides superior performance for SONET/SDH, 10G FC and Ethernet applications up to 40km optical links.

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Storage Temperature	TST	-40	+85	℃
Case Operating Temperature	TIP	0	+70	℃
Supply Voltage 1	VCC3	-0.5	+4.0	V
Supply Voltage 2	VCC5	-0.5	+6.0	V

Electrical Characteristics (TOP= 0 to70 °C)

Parameter	Symbol	Min	Typ	Max	Unit	Note
Supply Voltage 1	Vcc5	4.75		5.25	V
Supply Voltage 2	Vcc3	3.13		3.45	V
Supply Current – Vcc5 supply	Icc5			250	mA
Supply Current – Vcc3 supply	Icc3			500	mA
Module total power	P			3.5	W
Transmitter
Input differential impedance	Rin		100		Ω	1
Differential data input swing	Vin,pp	150		820	mV
Transmit Disable Voltage	VD	2.0		Vcc	V
Transmit Enable Voltage	VEN	GND		GND+ 0.8	V
Transmit Disable Assert Time	T_off			100	ms
Tx Enable Assert Time	T_on			100	ms
Receiver
Differential data output swing	Vout,pp	300	500	850	mV
Data output rise time	tr			35	ps	2
Data output fall time	tf			35	ps	2
LOS Fault	VLOS fault	Vcc – 0.5		VccHOST	V	3
LOS Normal	VLOS norm	GND		GND+0.5	V	3
Power Supply Rejection	PSR	See Note 4 below				4

Notes

1. After internal AC coupling.

2. 20 – 80 %

3.Loss of Signal is open collector to be pulled up with a 4.7k – 10kohm resistor to 3.15 – 3.6V. Logic 0 indicates normal operation; logic 1 indicates no signal detected.

4. Per Section 2.7.1. in the XFP MSA Specification.

Optical Parameters (TOP= 0 to70°C)

Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Transmitter
Operating Date Rate	BR	9.95		11.3	Gb/s
Bit Error Rate	BER			10-12
Maximum Launch Power	PMAX	-1		+4	dBm	1
Optical Wavelength-End of Life	λ	X-100	X	X+100	pm
Optical Wavelength-Beginning of Life	λ	X-25	X	X+25	pm
Optical Extinction Ratio	ER	8.2			dB
Spectral Width@-20dB	Δλ			1	nm
Sidemode Supression ratio	SSRmin	30			dB
Rise/Fall Time (20%~80%)	Tr/Tf			35	ps
Average Launch power of OFF Transmitter	POFF			-30	dBm
Tx Jitter	Txj	Compliant with each standard requirement
Optical Eye Mask		IEEE802.3ae				2
Receiver
Operating Date Rate	BR	9.95		11.3	Gb/s
Receiver Sensitivity	Sen			-16	dBm	2
Maximum Input Power	PMAX	0			dBm	2
Optical Center Wavelength	λC	1260		1600	nm
Receiver Reflectance	Rrx			-27	dB
LOS De-Assert	LOSD			-17	dBm
LOS Assert	LOSA	-27			dBm
LOS Hysteresis	LOSH	0.5		5	dB

Notes:

1. The optical power is launched into SMF.

2. Measured with a PRBS 231-1 test pattern @10.3125Gbps BER<10-12.

Pin Assignment

Diagram of Host Board Connector Block Pin Numbers and Name

10G XFP DWDM 40km

Mechanical Dimensions

10G XFP DWDM 40km

Order Information:

RXPD-10GD40-CXX XX: 100GHZ ITU Grid Wavelength

Part No.	Central Wavelength(nm)	Frequency (THZ)
RXPD-10GD40-C61	1528.77	196.1
RXPD-10GD40-C60	1529.55	196.0
RXPD-10GD40-C59	1530.33	195.9
RXPD-10GD40-C58	1531.12	195.8
RXPD-10GD40-C57	1531.90	195.7
RXPD-10GD40-C56	1532.68	195.6
RXPD-10GD40-C55	1533.47	195.5
RXPD-10GD40-C54	1534.25	195.4
RXPD-10GD40-C53	1535.04	195.3
RXPD-10GD40-C52	1535.82	195.2
RXPD-10GD40-C51	1536.61	195.1
RXPD-10GD40-C50	1537.40	195.0
RXPD-10GD40-C49	1538.19	194.9
RXPD-10GD40-C48	1538.98	194.8
RXPD-10GD40-C47	1539.77	194.7
RXPD-10GD40-C46	1540.56	194.6
RXPD-10GD40-C45	1541.35	194.5
RXPD-10GD40-C44	1542.14	194.4
RXPD-10GD40-C43	1542.94	194.3
RXPD-10GD40-C42	1543.73	194.2
RXPD-10GD40-C41	1544.53	194.1
RXPD-10GD40-C40	1545.32	194.0
RXPD-10GD40-C39	1546.12	193.9
RXPD-10GD40-C38	1546.92	193.8
RXPD-10GD40-C37	1547.72	193.7
RXPD-10GD40-C36	1548.51	193.6
RXPD-10GD40-C35	1549.32	193.5
RXPD-10GD40-C34	1550.12	193.4
RXPD-10GD40-C33	1550.92	193.3
RXPD-10GD40-C32	1551.72	193.2
RXPD-10GD40-C31	1552.52	193.1
RXPD-10GD40-C30	1553.33	193.0
RXPD-10GD40-C29	1554.13	192.9
RXPD-10GD40-C28	1554.94	192.8
RXPD-10GD40-C27	1555.75	192.7
RXPD-10GD40-C26	1556.55	192.6
RXPD-10GD40-C25	1557.36	192.5
RXPD-10GD40-C24	1558.17	192.4
RXPD-10GD40-C23	1558.98	192.3
RXPD-10GD40-C22	1559.79	192.2
RXPD-10GD40-C21	1560.61	192.1
RXPD-10GD40-C20	1561.42	192.0
RXPD-10GD40-C19	1562.23	191.9
RXPD-10GD40-C18	1563.05	191.8
RXPD-10GD40-C17	1563.86	191.7

相关产品

10G DWDM SFP+ Optical Transceiver

10G SFP+ optical transceiver module, support 10Gb/s and up to 100 km transmission, including: SFP+ SR, SFP+ LR, SFP+ ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, 5G network front-haul solution, network switch, PTN, OTN and so on.

10G SFP+ Optical Transceiver

10G CWDM SFP+ Optical Transceiver

10G BIDI SFP+ Optical Transceiver

10G DWDM SFF 40km Transceiver -40℃ To 85℃

Features 1550nm or DWDM EML Laser with TEC,Available in all C‐Band Wavelengths on the 50GHz PIN- TIAReceiver LC duplex connector or customizable pigtail fiber Single Channel+ 3.3V Power Supply The CDR off-line mode supports 155-9.95 GBIT/s bit rate, and the CDR mode supports 9.95-10.3125 GBIT/s bit rate Internal Transmitting/Receiving CDR -40℃ to 85℃ Working Industria Temperature Suitable for40km SMF connection Comply with SFF-8472 Rev 10.2 Whole Metal Shell and Excellent electromagnetic interference performance Completely comply with RoHS Standard

XFP 10G 1310nm 10km Transceiver

Features: Support multi protocol from 9.95Gb/s to 11.3Gb/s Hot pluggable 30 pin connector Compliant with XFP MSA Transmission distance of 10km over Single mode fiber 1310nm DFB laser transmitter. Duplex LC connector 2-wire interface for management and diagnostic monitor XFI electrical interface with AC coupling Single power supply voltages: +3.3V Temperature range 0°C to 70°C Power dissipation: <1.5W RoHS Compliant Part Applications: 10GBASE-LR/LW Ethernet SONET OC-192 /SDH 1200-SM-LL-L 10G Fiber Channel Other optical links Transceiver Types:

XFP 10G 1550nm 40km Transceiver

Features: Support multi protocol from 9.95Gb/s to 11.3Gb/s Hot pluggable 30 pin connector Compliant with XFP MSA Transmission distance of 40km over single mode fiber Cooled EML laser transmitter. Duplex LC connector 2-wire interface for management and diagnostic monitor XFI electrical interface with AC coupling Power supply voltages: +3.3V, +5V Temperature range 0°C to 70°C Power dissipation: <3W RoHS Compliant Part Applications: 10GBASE-ER/EW Ethernet SONET OC-192 IR-2/SONET OC-192 IR-3/SDH STM S-64.2b/SDH STM S-64.3b 40km 10G FC Other optical links Transceiver Types:

XFP 10G 1550nm 80km Transceiver

Features: Support multi protocol from 9.95Gb/s to 11.3Gb/s Hot pluggable 30 pin connector Compliant with XFP MSA Transmission distance of 80km over single mode fiber Cooled EML laser transmitter. APD Receiver Duplex LC connector 2-wire interface for management and diagnostic monitor XFI electrical interface with AC coupling Power supply voltages: +3.3V, +5V Temperature range 0°C to 70°C Power dissipation: <3.5W RoHS Compliant Part Applications: 10GBASE-ZR/ZW Ethernet SONET OC-192 / SDH STM-64 ITU-T G.959.1 P1L1-2D2 80km 10G FC Other optical links Transceiver Types:

联系我们